Upgrade your Titans with a vulcanic boom cannon!
This old school design allows you to upgrade your Titans with an older version of the boom cannon. It features a socket for 5mm magnets and comes presupported.
This is in the package:
- Vulcanic Boom Cannon (plain)
- Vulcanic Boom Cannon (supported)
- Chitubox File for easy adding of supports
I do test print all files on an Anycubic Mono X. However, some machines may require additional supports.
**Note: **This is designed for resin printers. FDM will not work.
Reduced lift speed leads to best results when printing presupported files. All files were successfully tested using a lift speed of 45 mm/min. Confirmed successful printing settings by GrimDark Terrain using Anycubic Grey resin with the AnyCubic Mono X:
Layer Height: 0.025mm Bottom Layer Count: 8 Exposure Time: 1.6s Bottom Exposure Time: 30s
Troubleshooting / Failed Prints
If peeling from the build-plate mostly happens due to
- an insufficient bottom layer count or
- bottom exposure time.
Solution: Increase one or both.
If the model’s supports fail, the reason for this in most cases is:
- inadequate exposure time or
- lift speed to fast
Solution:Increase exposure time or descrease lift speed or both.
Make sure the environment you’re printing in is sufficiently warm. Most resins show best results at 22-25°C.
Regarding pre-supports and scaling.
The supports are designed to be printed at the default 100% scale, I cannot guarantee they will work for re-scaled models. Of course this is all dependent on printer settings and resin types so please feel free to experiement. For the ease of things I have included the chitubox file for supports. Unsupported versions of all files are included so users may experiment with their own scales, settings and supports.