The Walls of Mytilene is a multi-part fortfication kit that allows you to build a variety of different wall layouts. From city walls to small fortified positions: with the modular Walls of Mytilene set you will be ready to fortify your gaming tables.
The Walls of Mytilene Package includes:
- Tower Pieces
- 4 different tower toppings (Palace, Spire, Tech and Battlement)
- Long Straight Segments
- Short Straight Segments
- Forward positions
- Small Guns (Demolisher, Vulcan, Double and Triple)
Please have a look at the various preview pictures for different build suggestions.
Print Info
Reduced lift speed leads to best results when printing presupported files. All files were successfully tested using a lift speed of 45 mm/min. Confirmed successful printing settings by GrimDark Terrain using Anycubic Grey resin with the AnyCubic Mono X:
Layer Height: 0.025mm Bottom Layer Count: 8 Exposure Time: 1.6s Bottom Exposure Time: 30s
Troubleshooting / Failed Prints
If peeling from the build-plate mostly happens due to
- an insufficient bottom layer count or
- bottom exposure time.
Solution: Increase one or both.
If the model’s supports fail, the reason for this in most cases is:
- inadequate exposure time or
- lift speed to fast
Solution:Increase exposure time or descrease lift speed or both.
Make sure the environment you’re printing in is sufficiently warm. Most resins show best results at 22-25°C.
Regarding pre-supports and scaling.
The supports are designed to be printed at the default 100% scale, I cannot guarantee they will work for re-scaled models. Of course this is all dependent on printer settings and resin types so please feel free to experiement. For the ease of things I have included the chitubox file for supports. Unsupported versions of all files are included so users may experiment with their own scales, settings and supports.
Reviews
There are no reviews yet.