January 2021 – Walls of Mytilene (STL Package)

The Walls of Mytilene is a multi-part fortfication kit that allows you to build a variety of different wall layouts. From city walls to small fortified positions: with the modular Walls of Mytilene set you will be ready to fortify your gaming tables.

The Walls of Mytilene Package includes:

• Tower Pieces
• 4 different tower toppings (Palace, Spire, Tech and Battlement)
• Long Straight Segments
• Short Straight Segments
• Forward positions
• Small Guns (Demolisher, Vulcan, Double and Triple)

Please have a look at the various preview pictures for different build suggestions.

Print Info

Reduced lift speed leads to best results when printing presupported files. All files were successfully tested using a lift speed of 45 mm/min. Confirmed successful printing settings by GrimDark Terrain using Anycubic Grey resin with the AnyCubic Mono X:

Layer Height: 0.025mm Bottom Layer Count: 8 Exposure Time: 1.6s Bottom Exposure Time: 30s

Troubleshooting / Failed Prints

If peeling from the build-plate mostly happens due to

• an insufficient bottom layer count or
• bottom exposure time.

Solution: Increase one or both.

If the model’s supports fail, the reason for this in most cases is:

• inadequate exposure time or
• lift speed to fast

Solution:Increase exposure time or descrease lift speed or both.

Make sure the environment you’re printing in is sufficiently warm. Most resins show best results at 22-25°C.

Regarding pre-supports and scaling.

The supports are designed to be printed at the default 100% scale, I cannot guarantee they will work for re-scaled models. Of course this is all dependent on printer settings and resin types so please feel free to experiement. For the ease of things I have included the chitubox file for supports. Unsupported versions of all files are included so users may experiment with their own scales, settings and supports.